home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Graphics Plus
/
Graphics Plus.iso
/
general
/
visulztn
/
saoimage
/
saoimage.lha
/
ctrldisk.c
< prev
next >
Wrap
C/C++ Source or Header
|
1990-06-10
|
14KB
|
491 lines
#ifndef lint
static char SccsId[] = "%W% %G%";
#endif
/* Module: ctrldisk.c (Control Disk Access)
* Purpose: Open, close, read, and write disk files and streams.
* Centralized to facilitate selecting system specific code.
* Subroutine: open_disk() returns: int
* Subroutine: fcntl_disk() returns: void
* Subroutine: flush_disk() returns: void
* Subroutine: lseek_disk() returns: int
* Subroutine: read_disk() returns: int
* Subroutine: write_disk() returns: int
* Subroutine: close_disk() returns: void
* UNIX calls: open(), fcntl(), lseek(), read(), write(), close()
* Copyright: 1989 Smithsonian Astrophysical Observatory
* You may do anything you like with this file except remove
* this copyright. The Smithsonian Astrophysical Observatory
* makes no representations about the suitability of this
* software for any purpose. It is provided "as is" without
* express or implied warranty.
* Modified: {0} Michael VanHilst initial version 6 Oct 1989
* {1} Jay Travisano (STScI) VMS changes 10 Nov 1989
* {n} <who> -- <does what> -- <when>
*/
#ifndef VMS
#include <stdio.h> /* define stderr, FILE, NULL, etc */
#include <sys/file.h> /* define open */
#include <fcntl.h> /* define fcntl */
/*
* Subroutine: open_disk
* Returns: File descriptor of open file (suitable for read())
*/
int open_disk ( filename, write_flag, no_block )
char *filename;
int write_flag; /* i: 1=WriteOnly, 0=ReadWrite, -1=ReadOnly */
int no_block; /* i: flag to set non-blocking flag */
{
int flags;
int fd;
if( write_flag > 0 ) {
flags = O_WRONLY;
if( write_flag > 1 )
/* create file if it doesn't exist, else condition causes error */
flags |= O_CREAT;
} else {
if( write_flag < 0 )
flags = O_RDONLY;
else
flags = O_RDWR;
}
if( no_block )
flags |= O_NDELAY;
if( (fd = open(filename, flags, 0)) == -1 ) {
perror("open error");
(void)fprintf(stderr, "ERROR: unable to open %s\n", filename);
(void)fflush(stderr);
}
return( fd );
}
/*
* Subroutine: fcntl_disk
* Purpose: Change an open file's flags, check for errors
*/
void fcntl_disk ( fd, write_flag, no_block, filename )
int fd; /* i: already open file descriptor */
int write_flag; /* i: 1=WriteOnly, 0=ReadWrite, -1=ReadOnly */
int no_block; /* i: include non-blocking flag */
char *filename; /* [i]: name of file being accessed */
{
int flags;
if( write_flag > 0 ) {
flags = O_WRONLY;
} else {
if( write_flag < 0 )
flags = O_RDWR;
else
flags = O_RDONLY;
}
if( no_block )
flags |= O_NDELAY;
if( fcntl(fd, F_SETFL, flags) == -1) {
perror("fcntl error");
if( filename != NULL ) {
(void)fprintf(stderr, "Error changing flags on %s\n", filename);
(void)fflush(stderr);
}
}
}
/*
* Subroutine: flush_disk
* Purpose: Read to functional end of file (useful with dynamic IO)
*/
void flush_disk ( fd, filename )
int fd;
char *filename;
{
int flags, tflags;
int blocking;
int bytes, total;
char buf[4096];
/* get status of device */
if( (flags = fcntl(fd, F_GETFL, 0)) == -1 ) {
(void)fprintf(stderr, "Error determining flag status on: %s\n", filename);
perror("fcntl error");
}
/* clear blocking if device would block on read */
if( (flags & O_NDELAY) == 0 ) {
blocking = 1;
tflags = flags & (~O_NDELAY);
if( fcntl(fd, F_SETFL, tflags) == -1) {
(void)fprintf(stderr,
"Error attempting to clear blocking on %s\n", filename);
perror("fcntl error");
return;
}
}
total = 0;
while( (bytes = read(fd, buf, 4096)) > 0 )
total += bytes;
#ifdef DEBUG
if( bytes < 0 ) {
/* though non-blocking, some OS return "Operation would block" error */
(void)fprintf(stderr, "Error attempting to flush %s\n", filename);
perror("read error");
}
if( total > 0 )
(void)fprintf(stderr, "Flushed %d bytes from pipe\n", total);
#endif
/* restore device to oriiginal status if needed */
if( blocking ) {
if( fcntl(fd, F_SETFL, flags) == -1 ) {
(void)fprintf(stderr,
"Error attempting to restore blocking on %s\n", filename);
perror("fcntl");
return;
}
}
}
/*
* Subroutine: lseek_disk
* Purpose: Skip into a disk file before reading, check for errors
*/
int lseek_disk ( fd, nbytes, filename )
int fd;
int nbytes;
char *filename; /* [i]: name of file being accessed */
{
long lseek(); /* type not declared in <sys/file.h> */
if( lseek(fd, (long)nbytes, L_SET) < 0 ) {
perror("lseek");
(void)fprintf(stderr, "Can't lseek %d bytes", nbytes);
if( filename != NULL )
(void)fprintf(stderr, "into file %s\n", filename);
else
(void)fprintf(stderr, "\n");
(void)fflush(stderr);
return( -1 );
}
return( 0 );
}
/*
* Subroutine: read_disk
* Purpose: Read bytes from a disk file, check for errors
* Returns: Number of bytes read, or error flag (-1)
* Note: If report_error is 0, reading fewer than nbytes
* is not treated as an error.
* Note: BSD4.3 interrupts reads on any signal. Thus reads may
* be broken into (hopefully consecutive) pieces.
*/
int read_disk ( fd, buf, nbytes, report_error, filename, detail )
int fd;
char *buf; /* i: buffer to receive read data */
int nbytes; /* i: number of bytes expected */
int report_error; /* i: report under-count read */
char *filename; /* [i]: name of file being read */
char *detail; /* [i]: "data", "header", etc */
{
int got_this_read, got_so_far, left_to_get;
int zero = 0; /* Count of times with 0 bytes */
for( got_so_far = 0; got_so_far < nbytes; got_so_far += got_this_read ) {
left_to_get = nbytes - got_so_far;
if( (got_this_read = read(fd, &(buf[got_so_far]), left_to_get) )
!= left_to_get ) {
if( (got_this_read <= 0) &&
((got_this_read < 0) || (++zero > 3)) ) {
/* Unfortunately, we can't distinguish between a non-blocking .. *
* connection, and a read that was interrupted at the start. ... *
* We assume the former is more likely and dangerous. *
* Lest we fall into an endless loop, allow only 3 0-byte reads. */
if( got_this_read < 0 )
perror("read error");
if( report_error ) {
(void)fprintf(stderr, "Error in reading");
if( detail != NULL )
(void)fprintf(stderr, " %s", detail);
if( filename != NULL )
(void)fprintf(stderr, " from %s", filename);
(void)fprintf(stderr, "\n");
(void)fflush(stderr);
if( report_error && (got_so_far >= 0) ) {
(void)fprintf(stderr, "Expected %d bytes, read %d\n",
nbytes, got_so_far);
(void)fflush(stderr);
}
}
return got_so_far;
}
}
}
return got_so_far;
}
/*
* Subroutine: write_disk
* Purpose: Write data to the open disk file or stream
*/
int write_disk ( fd, buf, nbytes, filename )
int fd;
char *buf;
int nbytes;
char *filename;
{
int gave;
if( (gave = write(fd, buf, nbytes)) < nbytes ) {
/* if interrupted (or non-blocking reader), try the rest again */
if( gave > 0 ) {
/* I haven't tested this way of handling the situation with IRAF */
nbytes -= gave;
buf += gave;
if( (gave = write(fd, buf, nbytes)) == nbytes )
return( 0 );
}
perror(filename);
return( -1 );
}
return( 0 );
}
/*
* Subroutine: close_disk
* Purpose: Close a disk file
*/
void close_disk ( fd, filename )
int fd;
char *filename;
{
#ifdef DEBUG
if( close(fd) == -1 ) {
perror("close error");
if( filename != NULL ) {
(void)fprintf(stderr, "Error closing %s\n", filename);
(void)fflush(stderr);
}
}
#else
(void)close(fd);
#endif
}
#else
/*
* VMS versions of disk functions. This implementation of these functions
* for VMS uses the standard C library calls, just as on Unix. Although
* this is the easiest approach for now, there are some problems:
*
* Performance The VAX/VMS C library functions dealing with
* file i/o have never been very efficient. Better
* performance (with some loss of generality, of
* course) can be gained by using RMS system routines.
* The VMS_OPEN_OPTIONS below should help, though.
*
* VMS Files VMS supports a number of different file types,
* which are sometimes handled differently by the
* the C library functions. For example, a read()
* operation on a file with a record size of 512
* bytes will return a maximum of 512 bytes, regardless
* of the number requested in the call. Thus, for
* these functions, we must loop around until all the
* i/o requested has been performed.
*
* Seeking Depending on the type of file being accessed, the
* operation of seeking to a byte offset in a file
* is somewhat unpredictable. For stream files, it
* is usually okay, but for record files, only byte
* offsets that are on a record boundary are allowed.
* (As a result of this behavior, the -skip and -header
* command line options may not always perform as
* expected on VMS.)
*
* Note: perror(NULL) will not work on VMS; some character string must
* be specified, even if just "".
*/
#define VMS_OPEN_OPTIONS "mbc=32","mbf=4","rop=RAH"
#include <stdio.h> /* define stderr, FILE, NULL, etc */
#include <sys/file.h> /* define open */
/*
* Subroutine: open_disk
* Returns: File descriptor of open file (suitable for read())
*/
int open_disk ( filename, write_flag, no_block )
char *filename;
int write_flag; /* i: 1=WriteOnly, 0=ReadWrite, -1=ReadOnly */
int no_block; /* i: flag to set non-blocking flag */
{
int flags;
int fd;
if( write_flag > 0 ) {
flags = O_WRONLY;
if( write_flag > 1 )
/* create file if it doesn't exist, else condition causes error */
flags |= O_CREAT;
} else {
if( write_flag < 0 )
flags = O_RDONLY;
else
flags = O_RDWR;
}
if( no_block )
flags |= O_NDELAY;
if( (fd = open(filename, flags, 0, VMS_OPEN_OPTIONS)) == -1 ) {
(void)fprintf(stderr, "ERROR: unable to open %s\n", filename);
fflush(stderr);
perror("open error");
}
return( fd );
}
/*
* Subroutine: fcntl_disk
* Purpose: Change an open file's flags, check for errors
*/
void fcntl_disk ( fd, write_flag, no_block, filename )
int fd; /* i: already open file descriptor */
int write_flag; /* i: 0=read, else write */
int no_block; /* i: include non-blocking flag */
char *filename; /* [i]: name of file being accessed */
{
/* fcntl() not supported on VMS */
}
/*
* Subroutine: lseek_disk
* Purpose: Skip into a disk file before reading, check for errors
*/
int lseek_disk ( fd, nbytes, filename )
int fd;
int nbytes;
char *filename; /* [i]: name of file being accessed */
{
long lseek(); /* type not declared in <sys/file.h> */
if( lseek(fd, (long)nbytes, SEEK_SET) < 0 ) {
(void)fprintf(stderr, "Can't lseek %d bytes", nbytes);
if( filename != NULL )
(void)fprintf(stderr, "into file %s\n", filename);
else
(void)fprintf(stderr, "\n");
fflush(stderr);
perror("lseek error");
return( -1 );
}
return( 0 );
}
/*
* Subroutine: read_disk
* Purpose: Read bytes from a disk file, check for errors
* Returns: Number of bytes read, or error flag (-1)
* Note: If report_error is 0, reading fewer than nbytes
* is not treated as an error.
*/
int read_disk ( fd, buf, nbytes, report_error, filename, detail )
int fd;
char *buf; /* i: buffer to receive read data */
int nbytes; /* i: number of bytes expected */
int report_error; /* i: report under-count read */
char *filename; /* [i]: name of file being read */
char *detail; /* [i]: "data", "header", etc */
{
/* Note: On VMS, read() will return the number of bytes requested
* or the logical record size, whichever is less. Loop around
* until we get everything we want.
*/
int got, count=0;
while (count < nbytes) {
got = read(fd, (buf+count), (nbytes-count));
if( got < 0 ) {
(void)fprintf(stderr, "Error in reading");
if( detail != NULL )
(void)fprintf(stderr, " %s", detail);
if( filename != NULL )
(void)fprintf(stderr, " from %s", filename);
(void)fprintf(stderr, "\n");
fflush(stderr);
perror("read error");
return( got );
} else if( got == 0 ) { /* reached EOF ? */
if( count < nbytes && report_error ) {
(void)fprintf(stderr, "Expected %d bytes, read %d\n", nbytes, count);
fflush(stderr);
}
break;
} else {
count += got;
}
}
return( count );
}
/*
* Subroutine: write_disk
* Purpose: Write data to the open disk file or stream
*/
void write_disk ( fd, buf, nbytes, filename )
int fd;
char *buf;
int nbytes;
char *filename;
{
/* Note: On VMS, write() may write the number of bytes requested
* or the logical record size, whichever is less. Loop around
* until we write everything we want.
*/
int gave, count=0;
while (count < nbytes) {
gave = write(fd, (buf+count), (nbytes-count));
if( gave < 0 ) {
perror (filename);
break;
} else {
count += gave;
}
}
}
/*
* Subroutine: close_disk
* Purpose: Close a disk file
*/
void close_disk ( fd, filename )
int fd;
char *filename;
{
int close();
if( close(fd) == -1 ) {
if( filename != NULL ) {
(void)fprintf(stderr,"Error closing %s\n", filename);
fflush(stderr);
}
perror("close error");
}
}
#endif